We are unable to ship any DMX controllers between 18th - 29th October. If you require any during that period please order ASAP. Any orders that are placed during that time will be shipped on 29th October.
USA/Canada Customers PLEASE NOTE: UPS are now requesting your TAX ID number in order to complete the shipping custom forms. This should be nine numbers. Please supply this when placing your order to prevent delays. Thank you.
The Ultamation UC-DMX-210 is an Ethernet to DMX control interface for DIN rail mounting applications.
Features complete control of an entire 512 channel DMX universe, the UC-DMX-210 provides the bridge between any programmable Ethernet based control system and a DMX lighting system (or any other DMX controlled devices).
In addition to discrete channel control, the UC-DMX-210 also implements
- Onboard fading, which removes any unwanted popcorn effects, giving a smooth lighting transition, as the light moves from one value to another.
- 2 independent pattern generators, capable of scrolling a pattern of up to 16 RGB values across a range of DMX addresses, removing the load from the host system.
Native lighting drivers are available for Crestron Home giving immediate access to single channel, tuneable while, RGB and RGBW standard DMX lighting fixtures, plus the 2 the pattern generators.
This video explains how to set things up.
Crestron SIMPL control modules are available which make integration a breeze, and a simple ASCII based protocol is also available making integration with other systems simple.
The following videos show the DMX controller in action, one with a Crestron system and one using the configuration tool for direct control.
The configuration app has been re-written from the ground up. It's available from the download section below.
The original configuration app is stall available here: The native Windows application used for initial setup. Download the OLD application here.
Note: The number of devices supported on the DMX network is dependent upon the electrical characteristics of the installation and DMX drivers used and suitable termination should always be used.
Note: A separate power supply is required. Please refer to the datasheet for specifications.
Note: There may be additional duty or import charges applied to your purchase, these are to be covered by the purchaser.
PLEASE NOTE:
While we have tested the controller with a large range of DMX drivers, we cannot verify every device. Our DMX controller sits squarely in the middle of the DMX timing specifications, but there are some drivers that do not adhere to the specification and this can be one of the causes of unwanted flickering.
For example, this common, cheap driver is known to be problematic. If you must use this driver, we have a modified firmware that may work, but we cannot offer a guarantee. Contact This email address is being protected from spambots. You need JavaScript enabled to view it. if you need the modified firmware.